Maurizio Cirrincione - School of Engineering and Physics



Maurizio Cirrincione

PhD, IEEE Senior Member

Professor of Engineering

Head of the School of Engineering and Physics 

  • Email: maurizio.cirrincione(at)usp.ac.fj
  • Telephone: +679 32 32419
  • Facsimile: +679 32 31511
  • Postal: School of Engineering & Physics, USP, Private Mail Bag, Laucala Campus, Suva, FIJI ISLANDS.

 

 

 

 

 


 

Maurizio Cirrincione, IEEE Senior Member (2010) received the “Laurea” degree from the Politecnico di Turino, Turin, Italy, in 1991, and the Ph.D. degree from the University of Palermo, Palermo, Italy, in 1996, both in electrical engineering. From 1996 to 2005  he was a Researcher with the I.S.S.I.A.-C.N.R. Section of Palermo (Institute on Intelligent Systems for Automation), Palermo, Italy. 

Since 2005 he has been Full Professor of Control Systems at the UTBM (University of Technology of Belfort-Montbéliard) in Belfort, France and member of the IRTES Laboratory and the FCLab (Fuel Cell laboratory) in Belfort, France.

Since April 2014 he has been the Head of the “School of Engineering and Physics” of the University of the South Pacific in Suva, Fiji Islands.

His current research interests are neural networks for modeling and control, system identification, intelligent control, power electronics, power quality, renewable energy systems, control of fuel cell systems, hybrid vehicles, and electrical machines and drives with rotating or linear AC motors.

Dr. Cirrincione was awarded the 1997 “E.R.Caianiello” prize in 1997 for the best Italian Ph.D. thesis on neural networks. He is author of over 140 papers, 50 of which on high impact factor journals, and of two books.

List of Publications

Peer-reviewed International Journals

[A1] G.Cirrincione, M.Cirrincione “A Robust Neural Approach for the Estimation of the Essential Parameters in Computer Vision”, International Journal on Artificial Intelligence Tool, vol 8, n.3, September 1999.

[A2] G.Cirrincione, M.Cirrincione "Linear System Identification by Using the TLS EXIN Neuron", "Neurocomputing" , Volume 28, Issue 1-3, October 1999, pp.53-74

[A3] G.Cirrincione, M.Cirrincione , J.Hérault, and S.VanHuffel" The MCA EXIN Neuron for the Minor Component Analysis" , IEEE Transactions on Neural Networks, vol.13, n.1, 2002, pp.160-187.

[A4] M. Cirrincione, M. Pucci “ A Rotor-Flux-Oriented Vector Control of an AC Drive with an Induction Motor Using the Progressive Learning Neural Network”, EERR “Electrical Engineering Research Report”, n.9, July 2000, pp.23-33.

[A5] M. Cirrincione, M. Pucci “ Identification of an Induction Motor with the Least-Squares Method”, EERR “Electrical Engineering Research Report”, n°. 10, December 2000, pp.22-30.

[A6] M. Cirrincione, M. Pucci, “ a Rotor-flux-oriented vector control of an ac-drive based on a recursive least-squares (RLS) method ”, EERR “ Electrical Engineering Research Report “ n° 9, July 2000, pp.11-22.

[A7] G.Cirrincione, M.Cirrincione "Neural Solids (for Optimization Problems)", Neural Processing Letters, Vol.13, Issue 1, Pages 1-15, February 2001.

[A8] M. Cirrincione, C.Serporta “Speed Estimation in Induction Motor Drives Using the Progressive Learning Neural Network (PLN)” EERR “Electrical Engineering Research Report”, n.15, June 2003, pp. 28-32.

[A9] V. Cecconi, M. Cirrincione. M. Pucci, "Guidelines For The Use Of Different Least-Squares Techniques To The Identification Of Induction Motors”, EERR “Electrical Engineering Research Report”, n.15, June 2003, pp. 1-11.

[A10] G.Cirrincione, M.Cirrincione " A Novel Self-Organising Neural Network for Motion Segmentation, “Applied Intelligence 18, 27-35, 2003

[A11] Cirrincione, M.; Miceli, R.; Galluzzo, G.R.; Trapanese, M.; “Preisach function identification by neural networks”, IEEE Transactions on Magnetics , Volume: 38 Issue: 5 , Sept. 2002, pp. 2421 -2423

[A12] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “A New Adaptive Integration Methodology for Estimating Flux in Induction Machine Drives ”, IEEE Transactions on Power Electronics, vol.19, n° 1, January 2004, pp.25-34

[A13] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, “Constrained Least-Squares Method For The Estimation Of The Electrical Parameters Of An Induction Motor ”, COMPEL (The International Journal for Computation and Mathematics in Electrical and Electronic Engineering ), Special Issue: Selected papers from the International Conference on Electrical Machines (ICEM) 2002 Bruges Belgium, vol.22, n.4, 2003, pp.1089-1101

[A14] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, " A New Experimental Application of Least-Squares Techniques for the Estimation of the Induction Motor Parameters“, IEEE Transactions on Industry Applications, vol.39, n.5, September/October 2003, pp.1247-1256

[A15] V.Cecconi, M.Cirrincione, M.Pucci, D.La Cascia, P.Zito, “A New Optimal Efficiency Direct Torque Control Induction Motor Drive for Electrical Vehicles”, Electromotion 2003, November 26-28 2003, Marrakesh, Morocco and published  in the special issue of the International Journal “Electromotion, vol 10, n. 3-4,  2003

[A16] M.Cirrincione, M.Pucci, G.Cirrincione, G.A. Capolino “Least-Squares Techniques for the Parameter Estimation of Induction Motors”, Electromotion 2003, 26-28 Novembre 2003, Marrakesh, Marocco and published  in the special issue of the International Journal “Electromotion, vol.10,  n. 3 - 4, 2003, INVITED PAPER

[A17] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, " A New TLS Based MRAS Speed Estimation With Adaptive Integration For High Performance Induction Machine Drives “IEEE Transactions on Industry Applications, vol.40, NO.4, July/August 2004, pp.1116-1137

[A18] V. Cecconi, E. Chiodo, M. Cirrincione, M. Pagano, M. Pucci, “Definition and Bayes Estimation of Stochastic Safety Index: Application to Cable-Way Point”, EIS (Engineering Intelligent Systems), vol. 11, n. 4, 2004,  pp 217-226

[A19] M. Cirrincione, R.Miceli, G. Ricco Galluzzo, M.Trapanese, “A Novel Neural Approach to the Determination of the Distribution Function in Magnetic Preisach Systems”, IEEE Transactions on Magnetics, vol. 40, no. 4, July 2004

[A20] M. Cirrincione, M. Pucci, “ An MRAS Speed Sensorless High Performance Induction Motor Drive with a Predictive Adaptive Model “,IEEE Transactions on Industrial Electronics, vol.52, n.2, Avril 2005, p. 532-551

[A21] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino,” On the Application of TLS Techniques to AC Electrical Drives“, Journal of Electrical Systems, 1st Issue, 1-1 (2005), pages 1-12  INVITED PAPER

[A22] M.Cirrincione, M.Pucci, “ Sensorless Direct Torque Control of an Induction Motor by a TLS based MRAS Observer with Adaptive Integration”, Automatica 41 (2005), pp.1843-1854, November 2005

[A23] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, “Constrained Minimisation for Parameter Estimation of Induction Motors in Saturated and Unsaturated Conditions ”, Industrial Electronics, IEEE Transactions on Volume 52,  Issue 5,  Oct. 2005 Page(s):1391 – 1402

[A24] G.Cirrincione, M.Cirrincione, M.Pucci, M. Godoy Simões. “A Neural Non-linear Predictive Control for PEM-FC”, Journal of Electrical Systems (JES), 1-2 (2005), pages 1-18  

[A25] M. Cirrincione , M. Pucci , G. Vitale, “A DTC Algorithm for Induction Motor Drives with 3-level Diode-Clamped Inverters”, Journal of Electrical Systems (JES), 1-4 (2005), pp. 17-32.

[A26] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, "An MRAS Sensorless Technique based on the MCA EXIN + Neuron for High Performance Induction Motor Drives", Automatika (Korema), 46(2005), 1-2, pp. 59-72.

[A27] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, “An Adaptive Speed Observer Based on a New Total Least-Squares Neuron for Induction Machine Drives”, IEEE Transactions on Industry Applications, vol. 42, n.1, Janvier/Février 2006, pp.89-104.

[A28] M. Cirrincione, M. Pucci, G. Vitale, G. Cirrincione, “A New Direct Torque Control Strategy for the Minimization of Common-Mode Emissions”, IEEE Transactions on Industry Applications, vol. 42, n.2, Mars/Avril 2006, pp.504-417.

[A29] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, “Sensorless Control of Induction Machines by a New Neural Algorithm: the TLS EXIN Neuron”, IEEE Transactions on Industrial Electronics, vol. 54, n. 1, Février 2007, Special Section Neural Network Applications in Power Electronics and Motor Drives (Guest Editor B.K. Bose), pp..127-149.

[A30] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, “Sensorless Control of Induction Motors by Reduced Order Observer with MCA EXIN + Based Adaptive Speed Estimation”, IEEE Transactions on Industrial Electronics, vol. 54, n. 1, Février 2007, Special Section Neural Network Applications in Power Electronics and Motor Drives (Guest Editor B.K. Bose), pp; 150-166.

[A31] G. Marsala , G. Cirrincione,, M. Pucci , M. Cirrincione “The GMR Neural Network for Inverse Problems”, Journal of Electrical Systems (JES), 3-3 (2007), pp.176-188.

[A32] M. Cirrincione , M. Pucci , G. Cirrincione , A. Miraoui, “Space-Vector State Model of Induction Machines Including Rotor Slotting Effects: Towards a New Category of Observers”, IEEE Transactions on Industry Applications, Vol. 44, n.6, November/December 2008, p. 1683-1692.

[A33] M. Cirrincione , M. Pucci , G. Vitale, “A Single-Phase DG Generation Unit with Shunt Power Filter Capability by Adaptive Neural Filtering”, IEEE Transactions on Industrial Electronics, Vol. 55, N. 5, May 2008, p. 2093-2110 

[A34] B. Blunier, M. Pucci, G. Cirrincione, M. Cirrincione, A. Miraoui, “A Scroll Compressor With a High-Performance Sensorless Induction Motor Drive for the Air Management of a PEMFC System for Automotive Applications”, IEEE Transactions on Vehicular Technology, Vol. 57, n.6, November 2008, p. 3413-3427

[A35] R. Tirnovan, R. S. Giurgea, A. Miraoui, , M. Cirrincione; ‘Surrogate modelling of compressor characteristics for fuel-cell applications’, Applied Energy, Volume 85, Issue 5, May 2008, Pages 394-403

[A36]  R. Tirnovan, R. S. Giurgea, A. Miraoui, , M. Cirrincione ‘Surrogate model for proton exchange membrane fuel cell (PEMFC)’, Journal of Power Sources, Volume 175, Issue 2, 10 January 2008, Pages 773-778

[A37] S. Giurgea, D.Fodorean, G.Cirrincione, A.Miraoui, M.Cirrincione, “ Multi Model Optimization based on the Response Surface of the Reduced FEM Simulation Model with Application to a PMSM”, IEEE Transactions on Magnetics, vol. 44, Issue 9, September 2008, Pages: 2153-2157.

[A38] R. Tirnovan, S. Giurgea, A. Miraoui and M. Cirrincione, Proton exchange membrane fuel cell modeling based on a mixed moving least squares technique, Int J Hydrogen Energy 33 (2008), pp. 6232–6238

[A39] G. Marsala, M. Pucci, G. Vitale, M. Cirrincione, A. Miraoui, “A Prototype of a Fuel Cell PEM Emulator Based on a Buck Converter”, Applied Energy, Vol. 89, N.10, October 2009, pp. 2192- 2203..

[A40] Tirnovan, R. Giurgea, S. Miraoui, A. & Cirrincione, M., “Modelling the characteristics of turbocompressors for fuel cell systems using hybrid method based on moving least squares”, Applied Energy,; 2009, vol. 86, no7-8, pp. 1283-1289 

[A41] M. Cirrincione, M. Pucci, G. Vitale, G.S. Scordato “A Single-Phase Shunt Active Power Filter for Current Harmonic Compensation by Adaptive Neural Filtering”, EPE Journal, Vol. 19, N.1, March 2009

[A42] M. Cirrincione, M. Pucci, G. Vitale, A. Miraoui, “Current Harmonic Compensation by a Single-Phase Shunt Active Power Filter Controlled by Adaptive Neural Filtering”, IEEE Transactions on Industrial Electronics, Vol. 56, n. 8, pages 3128-3143, August 2009.

[A43] D.Torregrossa, F. Peyraut, M. Cirrincione, C. Espanet, A. Cassat, A. Miraoui, T "A New Passive Methodology for Reducing the Noise in Electrical Machines: Impact of some Parameters on the Modal Analysis" ,  IEEE Transaction on Industry Applications, Vol. 58, n.1, pages.1899-1907, 2010

[A44] M. Cirrincione, M. Pucci, G. Vitale, “Growing Neural Gas (GNG) based Maximum Power Point Tracking for High Performance Wind Generator with an Induction Machine”, IEEE Transactions on Industry Applications, Vol. 47, n. 2, pages 861-87, 2011.

[A45] M. Pucci ,M. Cirrincione “Neural MPPT Control of Wind Generators With Induction Machines Without Speed Sensors”, IEEE Transactions on Industrial Electronics, Vol. 58, n. 1, pages 37-47, 2011

[A46] M. Cirrincione, M. Pucci, G. Vitale “Direct Power Control of Three-Phase VSIs for the Minimization of Common-Mode Emissions in Distributed Generation Systems”, Electric Power Systems Research, vol. 81, issue 4., (2011), pp. 830-839.

[A47] M. Cirrincione, M. Pucci, G. Vitale, “Growing Neural Gas-Based MPPT of Variable Pitch Wind Generators with Induction Machines”, IEEE Transactions on Industry Applications, Vol. 48, n. 3, pages 1006-1016, 2012

[A48] A. Accetta, M. Cirrincione, M. Pucci, G. Vitale, “Sensorless Control of PMSM Fractional Horsepower Drives by Signal Injection and Neural Adaptive-Band Filtering”, IEEE Transactions on Industrial Electronics, Vol. 59, n. 3, pages 1355-1366, 2012

[A49] A. Accetta, M. Cirrincione, M. Pucci, G. Vitale, “MRAS Speed Observer for High-Performance Linear Induction Motor Drives Based on Linear Neural Networks”, IEEE Transactions on Power Electronics, Vol. 28, n. 1, pages 123-134, 2013

[A50] A. Accetta, M. Cirrincione, M. Pucci, G. Vitale, “Neural Sensorless Control of Linear Induction Motors by a Full-Order Luenberger Observer Considering the End-Effects”, in press with IEEE Transactions on Industry Applications en 2013.

[A51] M. Cirrincione, M. Pucci, G. Vitale,” Neural MPPT of Variable-Pitch Wind Generators With Induction Machines in a Wide Wind Speed Range, IEEE Transactions on Industry Applications, Vol.49, n.2, Page(s): 942 – 953, 2013.

[A52] F. Alonge, M. Cirrincione, F. F’Ippolito, M.Pucci,A; Sferlazza, “Parameter identification of linear induction motor model in extended range of operation by means of input-output data”, IEEE Transactions On Industry Applications, Vol. 50, No. 2, March/April 2014

Peer-reviewed International Journals (in press)

[AA1] B. Ye, G.Cirrincione, M.Cirrincione, M.Pucci, G.Vitale, “ Improved sensorless scalar control by a PLL tracking rotor slotting effects”, in 2nd review with IEEE Transactions on Industry Applications

 

Peer-reviewed International Conferences

[B1] M. Cirrincione, S. Millemaci, R.Rizzo, G.Vitale, “ A Neural Network Based System for Driving a Stepper Motor”, ISMCR ‘93, 21/24 September 1993, Turin, Italy.

[B2] G.Cirrincione, M.Cirrincione, G.Vitale " Fault Diagnosis in Three-Phase Converters Using the Kohonen Neural Network Classifier", SPEEDAM '94, Symposium on Power Electronics Electrical Drives Advanced Motors, Taormina, Italy, 8/10 June 1994, 8 pages

[B3] E.Basilico, M.Cirrincione, R.Miceli, S.Nuccio, G.Ricco Galluzzo, M.Speciale, M.Trapanese "Fault Diagnostics Technique of a Linear Asynchronous Motor", SPEEDAM '94, Symposium on Power Electronics Electrical Drives Advanced Motors, Taormina, 8/10 June 1994

[B4] G.Cirrincione, M.Cirrincione, G.Vitale " Diagnosis of Three-Phase converters Using the VQP Neural Network" 2nd IFAC Workshop on Computer Software Structures integrating AI/KBS System in Process Control, Lund, Sweden, 11/13 August 1994, 5 pages.

[B5] G.Cirrincione, M.Cirrincione, G.Vitale " A Kohonen Neural Network for the Diagnosis of Incipient Faults in Induction Motors ", ICEM '94, International Conference on Electrical Machines, Paris, France, 5/8 September 1994, 5 pages.

[B6] G.Cirrincione, M.Cirrincione, A. Flaccomio, G.Vitale " A Control Method for DC Motors Using Supervised Neural Networks", EPE (European Power Electronics) Symposium, Lausanne, Switzerland, 19-20 October 1994, 6 pages.

[B7] G.Cirrincione, M.Cirrincione, F. Piglione "A Neural Network Approach to the Interpretation of the Optical Flow for Rigid Motion: Planar Case", 2nd Japan-France Congress on Mechatronics, Takamatsu, Kagawa, Japan, 1/3 November 1994, 4 pages.

[B8] M.Cirrincione, R.Rizzo, G.Vitale, P.Vas, "Neural Networks in Motion Control; Theory, an Experimental Approach and Verification on a Test-Bed", PCIM '95, Nürnberg (Germany), 20-22 giugno 1995

[B9] G.Cirrincione, M.Cirrincione, F.Piglione "A Clustering Neural Network for On-Line Learning in Power Systems", NEURAP '95, 2nd International Conference on Neural Networks and their Applications Marseilles, France, 13-15 December 1995, 8 pages.

[B10] M. Cirrincione, A. Flaccomio , F. Piglione,  G. Vitale “An Experimental Approach to the Control of Electrical Drives by Use of a Progressive Learning Neural Network”, MELECON '96, pp. 222 -225 vol.1, Bari, 13-16 May 1996

[B11] M.Cirrincione, G. Cirrincione, R. Rizzo "Employment of a Progressive Learning Neural Network for Identification and Control: Theory and Numerical Tests", MELECON '96, (Mediterranean Electrical and Electronical Conference), pp. 1119 -1122 vol.2,Bari, Italy, 13-16 May 1996

[B12] G.Cirrincione, M.Cirrincione, F.Piglione, " A Neural Network Architecture for Static Security Mapping in Power Systems", MELECON '96, (Mediterranean Electrical and Electronical Conference), pp. 1611 -1614 vol.3, Bari, Italy, 13-16 May 1996

[B13] M.Cirrincione "Employment of a Progressive Learning Neural Network for Identification and Control" published in the proceedings of Wirn '97 (Italian Workshop on Neural Networks), Vietri sul Mare (SA), 22-24 May, 1997 (Lecture for the Caianiello Award for the best Italian PhD thesis on neural networks in Italy in 1996). INVITED PAPER

[B14] S.Amoroso, G.Salvo, M.Giaconia, M.Cirrincione "A Neural Network to Assess the Perceived Quality in the Railway Transport", presented in WCRR '97 (World Conference Railway Research), Florence, 11-13 November 1997.

[B15] G.Cirrincione, M.Cirrincione "Linear System Identification by Using the TLS EXIN Neuron", NEURAP'98, Fourth International Conference on Neural Networks and their Applications , Marseilles, France, March 11-13, 1998 ; This publication has been considered one of the best of the conference and then worthy publishing in the international journal „”Neurocomputing” (viz.[A2]), 6 pages

[B16] M. Cirrincione  “Control and Diagnosis of Electrical Drives by Using Neural Networks”, IEEE International Joint Symposia on Intelligence and Systems (SIS98): IAR98, Intelligence in Automation & Robotics, 210 –217, pp. 210 –217, Rockville, Maryland, May 21-23, 1998  INVITED PAPER

[B17] G.Cirrincione, M.Cirrincione "Robust Total Least Squares by the Nonlinear MCA EXIN Neuron" IEEE International Joint Symposia on Intelligence and Systems (SIS98): IAR98, Intelligence in Automation & Robotics, pp. 295 -300 Rockville, Maryland, USA, May 21-23, 1998

[B18] A. Cataliotti, V.Cecconi,  M. Cirrincione, A. Flaccomio, “Neural Network Based Estimation of the Flux Space Vector Angle for a Rotor Resistance Independent Indirect Field Oriented Control”, EPE Conference, 7-9 September 1999, Lausanne, Switzerland..

[B19] G. Cirrincione, M. Cirrincione, S. Van Huffel “Neural Geometry for Constrained Optimization”, ProRISC99, November 25-26 1999, Mierlo, the Netherlands

[B20] G.Cirrincione, M.Cirrincione and S. Van Huffel " The Essential/Fundamental Matrix Estimation as a Constrained Total Least Squares Problem: Theory ", CVPRIP 2000, Atlantic City (USA), 27/2-3/3/2000, 4 pages.

[B21] G.Cirrincione, M.Cirrincione and S. Van Huffel "The GeTLS EXIN Neuron for Linear Regression”, Neural Networks, 2000. IJCNN 2000, Proceedings of the IEEE-INNS-ENNS International Joint Conference on , pp. 285 –289, vol.6,, 24-27 July 2000, Como. 

[B22] G.Cirrincione, M.Cirrincione and S. Van Huffel "A Robust Neural Approach Against Outliers For The Structure From Motion Problem in Computer Vision", Conference on Statistics with Deficient Data,  Munich (Germany), July 2000 

[B23] G.Cirrincione, M.Cirrincione and S. Van Huffel "Mapping Approximation by the GMR Neural Network ",  4th World Multiconference on Circuits, Systems, Communications & Computers (CSCC 2000), Athens (Greece), July 2000. INVITED PAPER

[B24] M. Pucci, M. Cirrincione, “Estimation Of The Electrical Parameters Of An Induction Motor In Saturated And Unsaturated Conditions By Use Of The Least-Squares Method”, IEEE ACEMP (Aegean Conference on Electrical Machines and Power Electronics) 2001, Kusadasi, Turkey.

[B25] G.A.Capolino, G.Cirrincione, M. Cirrincione, H.Henao, R.Grisel, “Digital Signal Processing for ELECTRICAL Machines”, INVITED PAPER IEEE ACEMP (Aegean Conference on Electrical Machines and Power Electronics) 2001, Kusadasi, Turkey

[B26] G.Cirrincione, M.Cirrincione, “Neural minor component analysis and TLS”, 3rd International workshop on “TLS and Errors-in-Variables Modeling”, Leuven/Heverlee, August 27-29, 2001, Belgium

[B27] M. Pucci, M. Cirrincione, "A direct-torque control of an AC drive based on a recursive least-squares (RLS) method", IEEE SDEMPED (International Symposium on Diagnostics for Electrical Machine, Power Electronics and Drives) 2001, 1-3 September 2001, Gorizia, Italy

[B28] M. Cirrincione, M. Pucci, G. Vitale, "A Least-Squares Based Methodology for Estimating the Electrical Parameters of Induction Machine at Standstill", IEEE ISIE (International Symposium on Industrial Electronics) 2002, pp. 541 -547 vol.2 , L'Aquila, 8-11 July, 2002.

[B29] M. Cirrincione, M. Pucci, G. Cirrincione, G. Capolino, " Constrained Least-Squares Method For The Estimation Of The Electrical Parameters Of An Induction Motor ", ICEM (International Conference on Electrical Machines) 2002, 25-28 August, Brugge, Belgium.

[B30] M. Cirrincione, M. Pucci, G. Vitale, "A test-bench for experiments on control, identification and EMC of high performance adjustable speed drives with induction motors ", SPEEDAM (Symposium on Power Electronics Electrical Drives Automation & Motion) 2002, 11-14 June Ravello, Italy.

[B31] M. Cirrincione, M. Pucci, G. Cirrincione, "Estimation of the electrical parameters of an induction motor with the TLS EXIN neuron ", IEEE ICCDCS (International Caracas Conference on Devices, Circuits and Systems), pp. I034-1 -I034-8, 17-19 April, 2002, Aruba, Dutch Carribean;

[B32] M. Cirrincione, M. Pucci, "Experimental Verification of a Technique for the Real-Time Identification of Induction Motors Based on the Recursive Least-Squares ", IEEE AMC (7th International Workshop on Advanced Motion Control) 2002, pp. 326 –334, 3-5 July 2002, Maribor, Slovenia.

[B33] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, " A New Experimental Application of Least-Squares Techniques for the Estimation of the Induction Motor Parameters“, IEEE IAS 02 (Industry Applications Society Annual Meeting),Volume:2,13-18Oct.2002 pp. 1171 –1180, 13-18 October 2002, Pittsburgh, USA;.

[B34] V. Cecconi, E. Chiodo, M. Cirrincione, M. Pagano, M. Pucci, "Definition and Bayes Estimation of Stochastic Safety Index for Cable-Way Plant Design", IEEE PMAPS 02 (Probabilistic Methods Applied to Power Systems), 22-26 September 2002, Naples, Italy;

[B35] Trapanese, M.; Cirrincione, M.; Miceli, R.; Galluzzo, G.R.; “Preisach's function identification by neural network”, Magnetics Conference, 2002. INTERMAG Europe 2002. Digest of Technical Papers. 2002 IEEE International, pp. 421–421, 28 April-2 May 2002, Amsterdam, The Netherlands. 

[B36] M. Cirrincione, M. Pucci, “The MRAS Based Speed Estimation With A Linear Neuron For High Performance Induction Motor Drives And Its Experimentation ”, IEEE IEMDC (International Electrical Machines and Drives Conference), Madison (WI), USA,pp. 617 -623 vol.1 1-4 June 2003.

[B37] M. Cirrincione, M. Pucci, G. Vitale, “A Novel Direct Torque Control Of An Induction Motor Drive With A Three Level Inverter ”, IEEE Powertech 2003, Bologna, Italy, 23-26 June 2003.

[B38] Cirrincione G., Cirrincione, M., Lu C., Van Huffel S., “A Novel Neural Approach to Inverse Problems with Discontinuities (the GMR Neural Network)”, International Joint Conference on Neural Networks (IJCNN 2003), Portland, Oregon, USA, July 20-24, 2003

[B39] Cirrincione G., Cirrincione, M., Lu C., Pucci M, “Direct Torque Control of Induction Motors by Use of the GMR Neural Network”, International Joint Conference on Neural Networks (IJCNN 2003), Portland, Oregon, USA, July 20-24, 2003

[B40] M. Cirrincione, M. Pucci, G. Cirrincione, G. A. Capolino, “A New TLS Based MRAS Speed Estimation With Adaptive Integration For High Performance Induction Machine Drives ”, IEEE IAS 03 (Industry Applications Society Annual Meeting), Salt Lake City, 12-16 October 2003;

[B41] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “ A New Adaptive Neural Integrator for Improving Open-Loop Speed Estimators in Induction Machine Drives”, 20-25 June 2004, IEEE PESC 04, Aachen, Germany.

[B42] M. Cirrincione, M. Pucci, G. S. Scordato, G. Vitale, “A Low-Cost Three-Level Converter for Low-Power Electrical Drives with Induction Motor Applied to Direct Torque Control ”, 20-25 June 2004, IEEE PESC 04, Aachen, Germany.

[B43] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino,” Experimental Identification of an Induction Motor Considering the Effects of Main Flux Saturation by using a Constrained Minimization”, IEEE-ISIE (International Symposium of Industrial Electronics) 04, 4-7 May 2004, Ajaccio, France.

[B44] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “Direct Torque Control of Induction Machines Drives for the Minimisation of the Common Mode Emissions, IEEE ACEMP (Aegean Conference on Electrical Machines and Power Electronics)04, 26-28 May 2004, Istanbul, Turkey.

[B45] M. Cirrincione, M. Pucci, G. Vitale, S. Mangione, “ A New Adaptive Neural Harmonic Compensator for Inverter Fed Distributed Generation”, IASTED-ISC 2004  (IASTED International Conference on Intelligent Systems and Control) Honolulu, 23 - 25 august 2004  Hawaii-USA

[B46] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “An adaptive speed observer based on a new total least-squares neuron for induction machine drives”, IEEE IAS 04 (39° Industry Applications Society Annual Meeting), October 3-7, 2004, Seattle ( Washington) USA

[B47] M. Cirrincione, M. Pucci, G. Cirrincione, G. Vitale, “A New Direct Torque Control Strategy for the Minimization of Common-mode emissions “ IEEE IEMDC 2005 (International Electric Machines and Drives Conference), 15-18 May 2005, San Antonio, Texas, USA.

[B48] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “An Enhanced Neural MRAS Sensorless Technique based on Minor-Component-Analysis for Induction Motor Drives” INVITED PAPER, IEEE ISIE 05, June 20-23, 2005, Dubrovnik, Croatia.

[B49] G. Cirrincione, M. Cirrincione , M. Pucci , “A Comparative Analysis of Neural Control Methods for PEM-FC”, Electromotion 2005, September 27-29 2005, Lausanne, Suisse.

[B50] M. Cirrincione, M. Pucci, G. Vitale, G.S. Scordato “A Single-Phase Shunt Active Power Filter for Current Harmonic Compensation by Adaptive Neural Filtering”, IEEE EPE-PEMC 06 (12th International Power Electronics and Motion Control Conference), Special Session IPEED (Intelligent Power Electronics and Electrical Driver), Portoroz, Slovenia, August 30 - September 1, 2006.

[B51] M. Cirrincione , M. Pucci , G. Cirrincione , G. A. Capolino, “Sensorless Control of Induction Motor Drives by New Linear Neural Techniques”, IEEE EPE-PEMC 06 (12th International Power Electronics and Motion Control Conference), Special Session IPEED (Intelligent Power Electronics and Electrical Driver), Portoroz, Slovenia, August 30 - September 1, 2006.

[B52] M. Cirrincione , M. Pucci , G. Vitale, “A Single-Phase DG Generation Unit with Shunt Power Filter Capability by Adaptive Neural Filtering”, IEEE IECON 06, 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris (FRANCE), 6 – 10 Novembre 2006, Special Session RENEWABLE ENERGY SOURCES.

[B53] M. Cirrincione, M. Pucci , C. Serporta, G. Vitale, “Comparison of Direct Torque Control Techniques in Induction Motor Drives in Terms of Electromagnetic Conducted Emissions”, IEEE ISIE (International Symposium on Industrial Electronics), 9-13 July 2006, Montreal, Canada. 

[B54] G. Cirrincione, G. Marsala, M. Pucci, M. Cirrincione, “The GMR Neural Network for InverseProblems”, 9th workshop on Optimization and Inverse Problems in Electromagnetism, September 13th - 15th 2006, Sorrento (Italy)

[B55] M. Cirrincione , M. Pucci , G. Cirrincione , A. Miraoui, “Space-Vector State Model of Induction Machines Including Rotor Slotting Effects: Towards a New Category of Observers”, IEEE IAS 06 (41° Industry Applications Society Annual Meeting), October 8 - 12, 2006, Tampa Florida

[B56] M. Cirrincione , M. Pucci , G. Cirrincione , A. Miraoui, “Space-Vector State Model of Induction Machines Including Rotor and Stator Slotting Effects” IEEE IEMDC 2007 (International Electric Machines and Drives Conference), 3-7 Maggio 2007, Antalya, Turkey. 

[B57] M. Cirrincione, M. Pucci, G. Vitale, “Direct Power Control of Three-Phase VSIs for the Minimization of Common-Mode Emissions in Distributed Generation Systems”, ISIE 2007 IEEE International Symposium on Industrial Electronics, 4-7 June 2007, Vigo, Spain, Special Session EMC in Power Converters:Modelling, Design Optimization and Supresion Techniques.

[B58] M. Cirrincione, M. Pucci, G. Vitale, “New Direct Power Control Strategies of Three-Phase VSIs for the Minimization of Common-Mode Emissions in Distributed Generation Systems”, IEEE IAS 07 (42° Industry Applications Society Annual Meeting), September 23-27, 2007, New Orleans, USA.

[B59] A. Boucherit, Y. M. Ayad, A. Djerdir, M. Cirrincione, M. Pucci, G. Vitale, “Power Conditioning in Electrical Vehicles Fed by Fuel Cells and Supercapacitors with a Matrix Converter”, EPE 2007 - 12th European Conference on Power Electronics and Applications 2 - 5 September 2007, Aalborg, Denmark.

[B60] M. Cirrincione, M. C. Di Piazza, G. Marsala, M. Pucci, G. Vitale, “Real Time Simulation of Renewable Sources by Model-Based Control of DC/DC Converters”, ISIE 2008 IEEE International Symposium on Industrial Electronics, 30 june -2 July 2008, Cambridge, UK.

[B61] M. Cirrincione, M. C. Di Piazza, M. Pucci, G. Vitale, “Real-time Simulation of “Photovoltaic Arrays by Growing Neural Gas Controlled DC-DC Converter”, ”, IEEE PESC 08, Power Electronics Specialist Conference, 15-19 June , 2008, Rhodes, Greece.

[B62] D. Paire , M. Cirrincione , M. Pucci , R. K. Jàrdàn , I. Nagy, A. Miraoui,” Current Harmonic Compensation by a Three-Phase Space Vector Modulation Power Converter”, IEEE IECON 08, (The 34th Annual Conference of the IEEE Industrial Electronics Society), 10-13 November, Orlando, Florida, USA, Special Session Power Electronics for Alternative Energy Systems.

[B63] M. Cirrincione, M. Pucci, C. Serporta, A. Miraoui, “Rotor Slotting Effects in Induction Motors: Space-Vector Modellization, Finite Elements Experiments”, IEEE IECON 08, (The 34th Annual Conference of the IEEE Industrial Electronics Society), 10-13 November, Orlando, Florida, USA.

[B64] M. Cirrincione, M. Pucci, G. Vitale, “Direct Torque Control for Three-Level Fed Induction Motor Drives with Capacitor Voltage Ripple Minimization”, IEEE IECON 08, (The 34th Annual Conference of the IEEE Industrial Electronics Society), 10-13 November, Orlando, Florida, USA, Special Session Multilevel Converters for High Power Applications.

[B65] Giurgea, S. Fodorean, D. Cirrincione, G. Miraoui, A. & Cirrincione, M., ‘Multi Model Optimization Strategies Applied to a PMSM’, Proc. of the 16th Conference on the Computation of the Electromagnetic Fields - COMPUMAG’07, Aachen, Germany, pp.1129-1130, 24-28 July 2007.

[B66] Tirnovan, R. Giurgea, S. Miraoui, A. & Cirrincione, M., ‘Moving Least Squares Modelling of a Compressor used in Fuel Cell Generator Systems’, IEEE Power Electronics Specialists Conference IEEE PESC 08, Power Electronics Specialist Conference, 15-19 June , 2008; Rhodes, Greece.

[B67] J.Lagorse, S.Giurgea, D. Paire, M. Cirrincione, M.G. Simoes, A.Miraoui,” Optimal Design Analysis of a Stand-Alone Photovoltaic Hybrid System “,Industry Applications Society Annual Meeting, 2008. IAS '08. IEEE , 2008, pp.1-7. 

[B68] M. Cirrincione, M. Pucci, G. Vitale, “Growing Neural Gas (GNG) based Maximum Power Point Tracking for High Performance VOC-FOC based Wind Generator System with Induction Machine”, IEEE Energy Conversione Congress and Expo 2009 (ECCE 09), 20-24 September 2009, San Jose, USA.

[B69] A. Accetta, M. Cirrincione. M. Pucci, G. Vitale, “PMSM Drives Sensorless Position Control with Signal Injection and Neural Filtering”, IEEE International Electric Machines and Drives Conference, (IEMDC 09), 3-6 May 2009, Miami, USA.

[B70] D.Torregrossa, F. Peyraut, M. Cirrincione, C. Espanet, A. Cassat, A. Miraoui ,” "A New Passive Methodology for Controlling the Noise in Electrical Machines:Impact of some  Parameters on the Modal Analysis“, IEEE International Electric Machines and Drives Conference, (IEMDC 09), 3-6 May 2009, Miami, USA. 

[B71] M. Cirrincione, M. Cossentino, S. Gaglio, V. Hilaire, A. Koukam, M. Pucci, L. Sabatucci, G. Vitale,, “Intelligent Energy Management System”, 7th International Conference on Industrial Informatics, (INDIN 2009), 24-26 June 2009, Cardiff, UK. 

[B72] M. Cirrincione, M. Pucci, “Sensors-less Neural MPPT Control of Wind Generators with Induction Machines”, IECON 09 (the 35th Annual Conference of the IEEE Industrial Electronics Society), 3-5 November 2009, Porto, Portugal.

[B73] M. Cirrincione, M.Pucci, G. Vitale, “Growing Neural Gas Based Mppt Of Variable Pitch Wind Generators With Induction Machines’ IEEE Energy Conversion Congress and Expo 2010 (ECCE 10), 12-16 September 2010, Atlanta, USA

[B74] G. Cirrincione, M. Cirrincione, M.Pucci, A.Jaafari,” The Estimation Of The Induction Motor Parameters By The Getls Exin Neuron”, IEEE Energy Conversion Congress and Expo 2010 (ECCE 10), 12-16 September 2010, Atlanta, USA.

[B75] A. Accetta,, M. Cirrincione, G. Marsala, M. Pucci, G. Vitale, “Pem Fuel Cell System Model Predictive Control And Real–Time Operation On A Power Emulator”, IEEE Energy Conversion Congress and Expo 2010 (ECCE 10), 12-16 September 2010, Atlanta, USA

[B76] A. Accetta, M. Cirrincione, M. Pucci, “Sensorless Control of PMSM by a Linear Neural Network: TLS EXIN Neuron”,36th Annual Conference of the Industrial Electronics Society, (IECON 2010), 7-10 November, Phoenix, AZ, USA.

[B77], M. Cirrincione, M. Pucci, A. Sferlazza, G. Vitale, Neural based MRAS Sensorless Techniques for High Performance Linear Induction Motor Drives”, 36th Annual Conference of the Industrial Electronics Society, (IECON 2010), 7-10 November, Phoenix, AZ, USA

[B78] Accetta, A; Cirrincione M.; Pucci, M.; Vitale, G.; “MRAS speed observer for high performance linear induction motor drives based on linear neural networks » Energy Conversion Congress and Exposition (ECCE 2011), 2011 IEEE , Phoenix, AZ (USA), 16-22 September 2011, Page(s): 1765 – 1772

[B79] Cirrincione M.; Pucci, M.; Vitale, G ,”Neural MPPT of variable pitch wind generators with induction machines in a wide wind speed range “; Energy Conversion Congress and Exposition (ECCE), 2011 IEEE , Phoenix, AZ (USA), 17-22 September 2011, Page(s): 857 - 864 

[B80] Boucherit, A.; Djerdir, A.; Cirrincione M., “A new topology of a variable output-voltage DC-DC converter for fuel cell vehicles”.; IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, 6-9 September, 2011 IEEE , Pages: 1 - 7 

[B81] M. Cossentino, C. Lodato, S. Lopes, M. Pucci, G. Vitale, M. Cirrincione “A Multi-Agent Architecture for Simulating and Managing Microgrids , FedCSIS’11, Federated Conference on Computer Science and Information Systems,  5th International Workshop on Multi-Agent Systems and Simulation, September 18–21, 2011. Szczecin, Poland, pages 619 – 622, 

[B82] Boucherit, A.; Djerdir, A.; Cirrincione M., “Control and fuzzy logic management of a Variable Output-Voltage DC-DC converter for Fuel Cell/Super-capacitor supplied Vehicles”.; IEEE ITEC 2012 (Transportation, Electrification Conference ans Expo), Dearborn, Michigan (USA)°, 18-20 June, 2012

[B83] Alonge F., Cirrincione M., D’Ippolito F., Pucci M., Sferlazza A., “Parameter Estimation of Linear Induction Motor Model in Extended Range of Operation by Means of Input-Output Data”, Energy Conversion Congress and Exposition (ECCE 2012), 2012 IEEE , Raleigh, NC (USA), 15-20 September 2012,

[B84] A. Accetta, M. Cirrincione, M. Pucci, G. Vitale, “Neural Sensorless Control of Linear Induction Motors by a Full-Order Luenberger Observer considering the End-effects,” Energy Conversion Congress and Exposition (ECCE 2012), 2012 IEEE , Raleigh, NC (USA), 15-20 September 2012

[B85] F. Alonge, M. Cirrincione, F. D’Ippolito, M. Pucci, A. Sferlazza, G. Vitale, “Descriptor-type Kalman Filter and TLS EXIN Speed Estimate for Sensorless Control of a Linear Induction Motor”, 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI (USA), 21-22 September 2012.

[B86] B. Ye, M. Cirrincione, G. Cirrincione, M. Pucci, G. Vitale, “Improved Sensorless Scalar Control By a PLL Tracking Rotor Slotting Effects” , 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI (USA), 21-22 September 2012

[B87] M. Cirrincione, G. Cirrincione, M. Pucci, G; Vitale ,“Linear Neural Networks applied to Power Converters and AC Electrical Drives”, INVITED PAPER, International Conference on Renewable Energies and Power Quality (ICREPQ'13) Bilbao (Spain),20-22 March, 2013

[B88] F. Alonge, M. Cirrincione, .F. D'Ippolito, M. Pucci,  A. Sferlazza, “Neural based Robust Kalman Filter for Sensorless Control of Linear Induction Motors”, Energy Conversion Congress and Exposition (ECCE 2013), 2013 IEEE Denver, CO (USA), 15-19 September 2013

[B89] A. Accetta, M. Cirrincione, M. Pucci, G. Vitale, “Closed-Loop MRAS Speed Observer for Linear Induction Motor Drives”, Energy Conversion Congress and Exposition (ECCE 2013), 2013 IEEE Denver, CO (USA), 15-19 September 2013

[B90] G. Cirrincione,  M. Cirrincione, , M. Pucci, G; Vitale,” Parameter Identification of a Double-Layer-Capacitor 2-Branch Model by a Least-Squares Method”, 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), Vienna (Austria), 10-13 November 2013.

 

Peer-reviewed International Conferences (Submitted)

[BB1] M. Pucci, M. Cirrincione, L. Greco, C. Testa , G. Vitale,” Marine Current Turbine Generator System with Induction Machine Growing Neural Gas (GNG) MPPT based on Sensorless Sea Speed Estimation”, Energy Conversion Congress and Exposition (ECCE 2014), 2014 IEEE Pittsburgh,PA (USA), 14-18 September 2014

[BB2] A. Accetta, M. Cirrincione, M. Pucci,A. Sferlazza, “High Performance and High Efficiency Wind Generator Systems with Induction Machines by input-output Feedback Linearization Control”, Energy Conversion Congress and Exposition (ECCE 2014), 2014 IEEE Pittsburgh,PA (USA), 14-18 September 2014

[BB3] F. Alonge, M. Cirrincione, M. Pucci,A. Sferlazza, “Input-Output Feedback Linearization Control of Linear Induction Motors Including the End-Effects”, Energy Conversion Congress and Exposition (ECCE 2014), 2014 IEEE Pittsburgh,PA (USA), 14-18 September 2014

 

Peer-reviewed National Reviews

[C1] M.Cirrincione, R.Rizzo, G.Vitale, "Reti neurali per la diagnostica di azionamenti elettrici: aspetti teorici e verifiche sperimentali", published on the national review AEI (Italian Electrical and Electronical Association) in December 1996 in the framework of a special issue on neural networks, 6 pages

 

Peer-reviewed National Conferences

[D1] V.Cecconi, M.Cirrincione, S.Millemaci, G.Ricco Galluzzo, R.Rizzo, G.Vitale, ”Ottimizzazione di un algoritmo di controllo per un azionamento elettrico mediante rete neurale”, ANAE (National Association of Electrical Drives) 4th seminario interattivo su algoritmi di alimentazione e controllo dei motori elettrici. L’Aquila, 28/29 June 1993

[D2] G. Cirrincione, M. Cirrincione, S. Millemaci, G.Vitale "Alcune applicazioni delle reti neurali negli azionamenti elettrici", 95^ Riunione Annuale AEI (Associazione Elettrotecnica Italiana = Electrical Italian Association), Bologna, Italy, 2-5 October 1994, pp.151-157

[D3] G.Cirrincione, M.Cirrincione, F.Piglione " Load Flow approssimato mediante reti neurali", 95^ Riunione Annuale AEI (Associazione Elettrotecnica Italiana = Electrical Italian Association), Bologna, Italy, 2-5 October 1994, 9 pages

[D4] G.Cirrincione, M.Cirrincione, A.Flaccomio, R.Rizzo, G.Vitale, "Azionamenti elettrici controllati da sistemi neurali: teoria,approccio sperimentale e verifica su banco prova", ANAE, Associazione Nazionale Azionamenti Elettrici (National Association of Electrical Drives), 6^ Seminario Interattivo su Azionamenti Elettrici a Microprocessore, Bressanone, 6/8 March 1995.

[D5] G. Cirrincione, M.Cirrincione, F.Piglione, "Applicazione di una rete neurale ad apprendimento progressivo allo studio dei sistemi di potenza", 96^ Riunione annuale AEI (Associazione Elettrotecnica Italiana = Electrical Italian Association), Rome, Italy, 25-27 September 1995.

[D6] M.Cirrincione, M. Pucci, “Identificazione di un motore di un azionamento elettrico in corrente continua e validazione del modello attraverso reti neurali ” I Convegno Nazionale ANAE, Rimini 29-30 Ottobre 1998  Italy

[D7] G. Cirrincione, M. Cirrincione, G. Vitale, “Identificazione di parametri di azionamenti elettrici con tecniche combinate neurali e TLS”, 10° Seminario Interattivo su: Azionamenti Elettrici, Innovazioni Tecnologiche e Problematiche Emergenti (ANAE), Bressanone (BZ), Italy, 8-9 marzo 1999, 12 pages

[D8] G. Cirrincione, M. Cirrincione, ”Neural Networks for the Minor Subspace Analysis”, XXXIèmes Journées de Statistique, 17-21 Mai 1999 Grenoble – France 

[D9] M. Cirrincione, M. Pucci, G. Ricco Galluzzo, G. Vitale, "Un Banco di Misure e Prove per l’Identificazione dei Motori ad Induzione con Tecniche ai Minimi Quadrati", Seminario Interattivo su: Azionamenti Elettrici, Tecnologie e Problematiche Emergenti, Bressanone (BZ) 2002;

 

Technical Reports

[E1] M.Cirrincione,, S. Millemaci " Sottoinsiemi Fuzzy", Publication n.74 de la série ISSIA-CNR., mai 1994

[E2] M. Cirrincione, “I sistemi neurali per la diagnostica e il controllo”, Rencontres scientifiques CE.RI.S.E.P., Palermo, 10-12-17 octobre 1994

[E3] M.Cirrincione, A. Flaccomio, “Applicazione di una rete neurale ad apprendimento progressivo al controllo di un motore a corrente continua”, II Rencontres scientifiques CE.RI.S.E.P., Palermo, 21-23 décembre 1994

[E4] M.Cirrincione, M. Pucci, “Tecniche di progettazione dei controllori attraverso l’analisi in frequenza negli azionamenti elettrici con motore a corrente continua ed asincrono”, Publication n.245 de la série ISSIA-CNR., novembre 1999.

[E5] M. Cirrincione, G. Marsala, M. Pucci “Implementation of a recursive least-squares algorithm for the parameter estimation of an induction motor on a D-space ds1103 board” Publication n. 370 de la série ISSIA-CNR, décembre 2003

 

Theses

[F1] M. Cirrincione, "Robotic Vision: interpreting 3D images", Final thesis for graduation in Electrical Engineering, , Polytechnical Institute of Turin (top scores summa cum laude), Italy, 14th October 1991 (This thesis is theoretical and experimental and has been developed together with my brother because of its complexity, as suggested by the tutor Prof. Luigi Piglione)

[F2] M.Cirrincione:” Diagnostica e controllo con reti neurali di azionamenti elettrici “(Diagnostique et contrôle par réseaux neuronales des actionneurs électriques), Thèse doctorale, Palermo, Déc. 1996. 

 

Books

[G1] G.Cirrincione, M. Cirrincione, “Neural Based Orthogonal Data Fitting: The EXIN Neural Networks”, Hoboken, New Jersey, John Wiley & Sons, Inc., , series : Adaptive and Learning Systems for Signal Processing, Communications and Control, 255 pages, November 2010, pp 277, ISBN: 9780471322702, doi: 10.1002/9780470638286.index,

[G2], M. Cirrincione, M.Pucci; G Vitale “Power Converters and AC Electrical Drives with Linear Neural Networks”,. p. 661, Boca Raton:CRC Press, Taylor & Francis Group, ISBN: 9781439818145, April 2012

 

Chapter of Books

[G3] M. Cirrincione, A. Miraoui, M. Pucci, D. Torregrossa, Power Tracking Curve-Based Algorithm for Wind Energy Systems, Appendix D in: M. Godoy Simões, Felix A. Farret, Alternative Energy Systems: Design and Analysis with Induction Generators, Second Edition, Boca Raton:CRC Press, Taylor & Francis Group, ISBN 9781420055320, 2007

 






Disclaimer & Copyright | Contact Us
© Copyright 2004 - 2017 The University of the South Pacific (USP). All rights reserved.