A. Narayanan R. Kannan - School of Engineering and Physics



Dr. A. Rajeshkannan

[B.E. Bhr U, M.Tech. RECK, Ph.D. NITT]

Associate Professor -Materials/Mechanical Engineering


Introduction

Teaching Interest

Academic Information

Membership in Professional Bodies

  1. Senior Member International Association of Computer Science and Information Technology (IACSIT).
  2. Member of the specific scientific and technical committee of World Academy of Science Engineering and Technology (WASET).

Previous Experience

Personal Interest


          Research

          Research Interest

          Publications:

          Journals

          1. RajeshKannan. A, Dr. Dixit Garg and Mr. Jaideep Gupta, “Quality Audit in an Electric Company”, -Productivity Journal, Vol No. 41 Issue No. 2 focused on World class Manufacturing, Mar 2001.
          2. A. Rajeshkannan, K.S. Pandey S. Shanmugam and R. Narayanasamy, “Some Studies on Barreling of Powder Preforms during Cold Upsetting,” Journal of the Mechanical Behaviour of Materials, 17(6), 2006, pp.415-430
          3. A. Rajeshkannan, K.S. Pandey S. Shanmugam and R. Narayanasamy, “Deformation Behaviour of Sintered High Carbon Alloy P/M Steel in Powder Preform Forging,” Materials and Design, 29(9), Oct 2008, pp.1862-1867.
          4. A. Rajeshkannan, K.S. Pandey S. Shanmugam and R. Narayanasamy, ““Evaluation of Densification Behaviour in Fe-0.8%C  Steel Preforms during Cold Upsetting,” Engineering Today, 2(2), Jan 2008, pp.3-6.
          5. A. Rajeshkannan, K.S. Pandey S. Shanmugam and R. Narayanasamy, “Sintered Fe-0.8%C-1.0%Si-0.4%Cu P/M Steel Behaviour in Powder Preform Upsetting,” Journal of Iron and Steel Research: International, Volume 15, Issue 5, September 2008, Pages 81-87.
          6. A. Rajeshkannan, K.S. Pandey S. Shanmugam and R. Narayanasamy, “Some Studies on Sintered Fe-0.8%C Powder Metallurgy Steel During Cold Upsetting, International Journal of Materials Sciences 2(2), 2007 pp.177-189.
          7. A. Rajeshkannan, K.S. Pandey and S. Shanmugam “Some Investigation on the Cold Deformation Behaviour of Sintered Iron – 0.8% Carbon Alloy Powder Preforms,” Journal of Materials Processing Technology, 203, 2008, pp.542-547.
          8. A. Rajeshkannan, K.S. Pandey S. shanmugam and R. Narayanasamy, “Sintered Eutectoid   P/M Steel Behaviour during Cold Upsetting”, Materials Research, 11(1), 2008, pp.11-16.
          9. A. Rajeshkannan, Sumesh Narayan, “Strain hardening behaviour in Sintered Fe-0.8%C-1.0%Si-0.8%Cu powder metallurgy preform during cold upsetting, Proceedings of the Institution of Mechanical Engineers Part B, J. of Engg. Manufacture, 2009, Vol. 223, pp.1567-1572.
          10. A. Rajeshkannan, “Deformation behaviour of sintered silicon-copper steel preforms of various aspect ratios during cold upsetting, International Journal of Advanced Manufacturing Technology, 2010, 50(5-8), pp. 509-515.
          11. A. Rajeshkannan, Workability studies on cold upsetting of sintered copper alloy preforms, Materials Research, 13(4), 2010, pp.457-464.
          12. Sumesh Narayan, A. Rajeshkannan, Densification behaviour in forming of sintered iron-0.35%carbon powder metallurgy preform during cold upsetting, Materials & Design, 2011, 32 pp.1006-1013. 
          13. Sumesh Narayan, A. Rajeshkannan, Influence of carbon content on densification behaviour in forming of sintered plain carbon steel preforms, Proceedings of the Institution of Mechanical Engineers Part B, J. of Engg. Manufacture, 2011, 225(7), pp.1141-1151. 
          14. Sumesh Narayan, A. Rajeshkannan, Influence of carbon content on strain hardening behaviour of sintered plain carbon steel preforms, J. of Iron and Steel Research: International, 2011, 18(9), pp.33-40. 
          15. Narayan S, Rajeshkannan A. Workability studies in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting. Journal of Iron and Steel Research International 2011; 18(12), pp.80-87.
          16. Narayan S, Rajeshkannan A. Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting. Materials Research 2011 14(4):449-455.
          17. A. Rajeshkannan, K.S. Pandey, S. Shanmugam, R. Narayanasamy & S. Narayan, Some studies on sintered cold deformed plain carbon alloy steels, Materials & Design; 2012, 33, pp.115-120.
          18. Narayan S, Rajeshkannan A. Influence of carbon content on workability behaviour in forming of sintered plain carbon steel preforms. International Journal of Advanced Manufacturing Technology 2012, online published, DOI: 10.1007/s00170-012-4002-x.
          19. Narayan S, Rajeshkannan A. Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting, Materials Research, 2012; 15(2): 291-299.
          20. A. Sharma, K.K. Paliwal, S. Imoto, S. Miyano, V. Sharma, Rajeshkannan Ananthanarayanan, A Feature Selection Method using Fixed-Point Algorithm for DNA microarray gene expression data, International Journal of Knowledge-Based and Intelligent Engineering Systems, 2014, 18, pp.55-59.
          21. A. Rajeshkannan, S. Narayan, Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms, Advanced Materials Research, 2013; 651, pp.295-301.
          22. S. Narayan, A. Rajeshkannan, K.S. Pandey, S. Shanmugam, Workability behaviour of Fe-C-Mo steel preforms during cold forging, Journal of Iron and Steel Research, International, 2013; 20(9), pp.126-130.
          23. A. Rajeshkannan, N. Rai, M. Chand, R. Ram, N. Prasad, M. Naicker, Densification behaviour of sintered-forged aluminium composite preforms, Proceedings of the Institution of Mechanical Engineers Part B, J. of Engg. Manufacture, 2014, 228(3), pp.441-449.
          24. A. Rajeshkannan, R.S. Devi, A. Sharma, Some aspects on geometric and matrix work-hardening characteristics of sintered cold forged copper alloy preforms, Materials Research, 2014, 17(1), pp.196-202.
          25. A. Rajeshkannan, U. Mehta, Deformation study of sintered iron-carbon-silicon-copper steel compacts during cold forging, Materials and Manufacturing Processes, 2014, 29(4), pp.442-447.
          26. Harsh Saini, Gaurav Raicar, Alok Sharma, Sunil Lal, Abdollah Dehzangi, A. Rajeshkannan, James Lyons, Kuldip K. Paliwal, Protein structural class prediction via k-separated bigrams using position specific scoring matrix, Journal of Advanced Computational Intelligence and Intelligent Informatics, 2014, 18(4), pp.474-479. \
          27. A. Rajeshkannan and Alok Sharma, Densification and corrosion studies of as-sintered-swaged Al composite preforms, Advanced Materials Research, 2014; 911, pp.67-71.
          28. A. Rajeshkannan and Bibhya Sharma, Study of pore closure mechanism of aluminium composite processed through powder metallurgy route, Advanced Materials Research, 2014; 911, pp.50-54.
          29. A. Rajeshkannan, Alok Sharma and R. S. Devi, Evaluation of matrix and geometric strain hardening of axial deformed sintered Fe-0.75%C preform, Advanced Materials Research, 2014; 911, pp.143-147.
          30. A. Rajeshkannan and Victor Hoasirao, Some aspects on cold deformation characteristics of sintered Fe-0.8%C-1%Si-0.4%Cu steel preforms,mAdvanced Materials Research, 2014; 911, pp.163-167..
          31. S. Narayan and A. Rajeshkannan, Workability behaviour of powder metallurgy aluminium composites, Journal of Powder Technology, 2014, pp.1-7.
          32. Narayan S and Rajeshkannan A, Workability studies of sintered aluminum composites during hot deformation. Journal of Engineering Manufacture 2014; DOI: 10.1177/095440541455649.
          33. Narayan S and Rajeshkannan A, Workability behavior of powder metallurgy aluminum reinforced carbide composites during hot forging. Materials and Manufacturing Processes, 2015, 30(10), pp.1196-1201
          34. Utkal Mehta and Rajeshkannan A, Optimal auto-tuning of non-minimum phase process under relay control, Proc IMechE Part I: Journal of Systems and Control Engineering, 2015, DOI: 10.1177/0959651814566479.
          35. Narayan S, Rajeshkannan A, Deo RN. Corrosion behavior of sinter forged aluminium composites during hot deformation. Journal of corrosion science and engineering 2016;18 (26):1-20.

          Conferences

          1. A. Rajeshkannan, K.S. Pandey and S. shanmugam, Influence Of Frictional Constraints Between The Combined Stresses And The Continued Deformation And Densification Of Sintered High Carbon P/M Steel During Cold Deformation, Proceedings of Green Engineering Materials processing, International conference in Materials Science and Technology 2006, USA, Ohio, Cincinnatti,  15-19 Oct 2006.
          2. A. Rajeshkannan, K.S. Pandey and S. shanmugam, Densification Behaviour of Cold Forged Fe-C-Si-Cu Sintered Powder Metallurgy Steel, International Conference on Advances in Mechanical Engineering SRM Institute of Science and Technology Deemed University, Chennai, India: 14-16 December 2006.
          3. G.Anuradha, Rajeshkannan,A and Dr.K.S.Pandey, “Deformation, Densification And Bulging In Sintered AISI 2515 P/M Steels During Cold Axial Forging”, National level Conference on  ‘Applications of Emerging Technologies’ at Adhiyamaan College of Engineering, Hosur, Mar’ 2005.
          4. G.Anuradha, Rajeshkannan,A and Dr.K.S.Pandey,  “Relationship Between the Applied Stress on the Continued Deformation and Densification of Sintered AISI 2512 P/M Preforms During Cold Axial Compression Using Different Lubricating Constraints ” National level Conference on ‘Globally competitive eco-friendly Technologies in mechanical and mechatronics engineering’, at Kongu Engineering College, Perundurai, Apr’ 2005.
          5. B. Khamesh Kumar, PM. OSA. Prawin, G. Kanagaraj and A. Rajeshkannan, Some investigation of tensile deformation of vinyl ester matrix GFRP under the influence of fibre structure, third national conference for research scholars on “application of emerging technologies”, at Adhiyamaan College of Engineering, Hosur, 29-30 Mar’ 2006, pp.56.
          6. Benzy Insat. S, Ramanathan. CT, Sakthivel. M and A. Rajeshkannan, Influence of resin on tensile deformation behaviour of chopped strand glass fiber reinforced plastics, National conference on Emerging technologies in mechanical engineering, ETME 2006, at PET Engineering college, Apr 6-7, 2006, pp.78.
          7. A. Rajeshkannan and PM. OSA. Prawin, Phenomenon of strain hardening in Sintered High Carbon Steel Preforms during Cold Upsetting, International Conference on Advanced Manufacturing and Automation, Kalasalingam University, Krishnankoil, India: 26-28 March 2009.
          8. A. Rajeshkannan, K.S. Pandey and S. shanmugam, Evaluation of Deformation and Densification Behaviour in Sintered Fe-0.8%C-1.0%Mo Steel Preforms, International Conference on Emerging Research and Advances in Mechanical Engineering, Chennai, India: 19-21 March 2009.
          9. A. Rajeshkannan and S. Narayan, Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms, International conference on engineering materials ICEM 2012, Singapore: 30-31 Jan 2012.
          10. A. Rajeshkannan, M.N. Khan and A.K. Jeevanantham, Influence of barreling in deformation and densification behavior of sintered powder forged preforms, Second International Conference on Advances in Materials Processing and Characterisation, AMPC 2013, 6-8 February 2013.
          11. A. Rajeshkannan and Victor Hoasirao, Some aspects on cold deformation characteristics of sintered Fe-0.8%C-1%Si-0.4%Cu steel preforms, International conference on key engineering materials (ICKEM 2014), March 22-23, Bali, Indonesia.
          12. A. Rajeshkannan and Alok Sharma, Densification and corrosion studies of as-sintered-swaged Al composite preforms, International conference on key engineering materials (ICKEM 2014), March 22-23, Bali, Indonesia.
          13. A. Rajeshkannan and Bibhya Sharma, Study of pore closure mechanism of aluminium composite processed through powder metallurgy route, International conference on key engineering materials (ICKEM 2014), March 22-23, Bali, Indonesia.
          14. A. Rajeshkannan, Alok Sharma and R. S. Devi, Evaluation of matrix and geometric strain hardening of axial deformed sintered Fe-0.75%C preform, International conference on key engineering materials (ICKEM 2014), March 22-23, Bali, Indonesia.
          15. A. Rajeshkannan and R.S. Devi, Densification and workability study on non-linear deformation of aluminium composite during hot swaging, International Conference on Advances in Materials and Materials Processing, (AMMP-2015), 22/1/2015 to 23/1/2015 held at Karunya University, Coimbatore, India.
          16. A. Rajeshkannan and R.S. Devi, Powder metallurgy a potential green manufacturing processes: a review, International Conference in Bioenergy, Environment and Sustainable Technologies, (BEST-2015), 28/1/2015 to 31/1/2015 held at Arunai Engineering College, Tiruvannamalai, India.
          17. A. Rajeshkannan, R.S.Devi, and K.R.Dinesh, Modelling the mechanical strengthening parameter of sintered Fe-0.8%C preforms under cold upsetting, International Conference on Modern, Intelligent and Green Manufacturing (ICMIGM 2015), Dec 11 and 12, 2015, held at Erode Sengunthar Engineering College, Perundurai, Erode, India.
          18. A. Rajeshkannan, Some studies on the bulging characteristics of cold-upset steel preforms, International Conference on Material Science and Engineering Technology (ICMSET-2016), October 29-31, 2016, held at Tokyo University, Tokyo, Japan.
          19. A. Rajeshkannan, Study on the mechanism of pores deformation in aluminium composites under hot and cold upsetting processes, International Conference on Material Science and Engineering Technology (ICMSET-2016), October 29-31, 2016, held at Tokyo University, Tokyo, Japan.








          Disclaimer & Copyright | Contact Us
          © Copyright 2004 - 2017 The University of the South Pacific (USP). All rights reserved.